13″ Pro Vinyl floor cutter LVT-330BC for LVP, WPC, LVT, SPC, VCT, PVC and Rigid Core Vinyl Plank; Eighth upgrade; Best buy !

Price: $159.90
(as of Mar 09, 2024 22:15:28 UTC – Details)

Product Description

Design for LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring；

Max. Cutting Length: 328 mm / 12.9 inch

Max. Thickness Cutting: 8mm / 5/16 inch

Features: Straight cut, angle cut, notch cut and rip cut；

The blade can be moved from either side of the blade holder to make a notch cut.

Adjustable handle angle for easy operation, moving and store

Straight cut, angle cut, L-U- cutting, long cut;

Straight cut 90°

Free angle cut

Lengthwise cuts 0°/180°

New add installation tools，L- U- Scribe;

Cut one side of the L-U-shape;

Trim the other side line of the U-shaped edge

Indoor installation, New added features, L-U- cutting ; 4 pcs slotting blades (0.5inch, 1inch, 1.3inch, 13inch)

U-shaped cutting steps

Slotting blades are mainly used in complex tasks. such as indoor corners, kitchen island, door frames, and more, floor paving, Save a lot of time.t is recommended to leave all complex paving tasks at the end for unified completion.

Here are the cutting steps:

Complete steps 1, 2, 3, and 4 of cutting, then rotate the floor； Next, replace one of the slotting blades and complete 5, 6, 7 cutting steps;

Soft vinyl flooring that can be fully cut (Cutting length is 13 inches or other sizes); Hard and prone to cracking flooring, Be sure to cut shallowly (1/16 inch deep & approximately 4 inches cutting length).

The 8th upgrade of LVT-330;

Fixed slotted blade (0.5inch, 1inch, 1.3inch ) for U-shaped cutting and others;

Floor installation scenario, general diagram

Floor installation scenario, Copy the shape of the door frame for a U cutting;

The floor installation shown in the diagram includes：Straight cut, ” L & 凵” cut, lengthwise cut.

How to cut crackable vinyl plank floor – SPC floor ?

Each shallow cut is 4″ long x 1/16″ deep for spc flooring； (1~2mm deep)； This way, cutting the floor won’t crack.

Each shallow cut is 4″ long x 1/16″ deep for spc flooring； (1~2mm deep)；

Eighth upgrade; A set of vinyl plank cutter LVT-330; include 3 pcs Slotting blade (0.5inch, 1inch, 1.3inch ) and 10 inch Contour Gauge for For professional installation of vinyl flooring.
The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners，most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time！
12.9″ cutting width and 5/16″（8mm） cutting depth; Straight cut, Angle cut; ” L & 凵” cut, Rip cut and more. Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. No dust, No noise, No electricity needed, Easy and Professional cutting. It cannot cut laminate flooring and other hardwoods. Cutting unapproved materials will void warranty. Pls don’t try!
Replacement blade can be got at the online official brand store (MANTISTOL).
Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank （SPC or RVP）, it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.
How to cut crackable Rigid Core vinyl plank floor – SPC & RVP floor ? Each cut can only cut 1/16 inch (1~2mm) deep& approximately 4 inches cutting length, which is equal to that each cut is the upper surface of the floor. (Request to control your arm strength well, not too much.) The floor won’t crack.